Basic Information
  • Rated loads 50 Kg – 100 Kg – 200 Kg
  • Rated Speed 0,20 m/s
  • Power 380 VAC
  • Max. Travel height 25 m
  • Max. Service stops 8
  • Shaft doors Guillotine Door or Sqing Door.
  • Motor with compact worm gear.
  • Suspensions 1:1
  • No extra machine room required.
  • Overhead Min.1300 mm required.
  • Shaft pit SH Model not required, FL Model 300 mm required
Basic Features
  • Cabin and shaft doors with stainless steel or painted.
  • Galvanized structure for the installation in a supporting shaft.Quick and easy installation by pre-assembled components.
  • Plug-and-play microprocessor controls, completely pre-wire, low voltage engineering.
  • Call and send control with position indicator.
Otional
  • VVVF drive.
  • Cabin and shelf heater.
  • Cabin lighting.
  • Shaft lighting.
  • Overload device.
  • Automatic shaft doors.
  • Different materials and designs acc.to customer’s demands.
  • Intercoms
  • Water/dust protection contacts (IP).
  • Special solution for reduced overhead.
  • 220 VAC with VVVF Drive.
  • Arrival buzzer.

EMAK Dumbwaiters are usually available with short lead time and, subject to builder’s work, can be installed adn working within a few days.

SH MODEL 

Doors on Serving Height With Guillotine Door
FL MODEL

Doors at Floor Level With Swing Door

We are very flexible in meeting our customers

demands and installation requirements

LOADING CONFIGURATIONS

TYPE CABIN INTERNAL DOOR REQUIRED SHAFT
Width (CW) Depth (CD) Height (CH) Width (DW)  Height (DH)  Overhead (OH) Width (SW) Depth (SD)
D1E60 600 600 600 600 600 1300 900 750*
D1E80 800 800 800 800 800 1300 1100 950*

*Minimum Required Shaft Depth : SD + 60 mm

OPPOSITE SIDES

TYPE CABIN INTERNAL DOOR REQUIRED SHAFT
Width (CW) Depth (CD) Height (CH) Width (DW)  Height (DH)  Overhead (OH) Width (SW) Depth (SD)
D2EX60 600 600 600 600 600 1300 900 750*
D2EX80 800 800 800 800 800 1300 1100 950*

*Minimum Required Shaft Depth : SD + 60 mm + 60 mm

ADJACENT SIDES WITHOUT CABIN DOOR

TYPE CABIN INTERNAL DOOR REQUIRED SHAFT
Width (CW) Depth (CD) Height (CH) Width (DW)  Height (DH)  Overhead (OH) Width (SW) Depth (SD)
D2ER60 600 600 600 600 600 1300 900* 900*
D2ER80 800 800 800 800 800 1300 1100* 1100*

*Minimum Required Shaft Width : SW + 60 mm

*Minimum Required Shaft DEPTH : SD+ 60 mm

ADJACENT SIDES WITH CABIN DOOR

TYPE CABIN INTERNAL DOOR REQUIRED SHAFT
Width (CW) Depth (CD) Height (CH) Width (DW)  Height (DH)  Overhead (OH) Width (SW) Depth (SD)
D2EL60 600 600 600 600 600 1300 900* 1120*
D2EL80 800 800 800 800 800 1300 1100* 1320*

*Minimum Required Shaft Width : SW + 60 mm

*Minimum Required Shaft DEPTH : SD+ 60 mm